Shaft Bolt & Stud System for Replacement Trimmer Heads MULTI-APPLICATION SHAFT BOLT & STUD SYSTEM   PART NO. COLOR SHAFT BOLT STUD COLOR/SIZE FINISHED THREAD SIZE  H-150110 BLUE 1 NOT  NEEDED 8mm X 1.25 FLH H-150120 SILVER 2 NOT  NEEDED  10mm X 1.25 FLH H-150130 GOLD 3  NOT NEEDED 10mm X 1.0 FLH-CB H-150140 RED 4 NOT NEEDED 3/8 X 24 FRH  H-150110 BLUE 1 BLACK H-1530025 10mm X 1.25 MLH  H-150120 SILVER   2 BLACK H-1530025 8mm X 1.25 MLH H-150130 GOLD 3 SILVER H-1530026 7mm X 1.0 MLH
SHAFT BOLT INSTRUCTIONS   To assemble shaft bolt and stud (if needed) please refer to instructions below.	THREAD ROTATION INSTRUCTIONS    MLH    FLH    FRH    FLH-CB        MALE LEFT HAND FEMALE LEFT HAND FEMALE RIGHT HAND FEMALE LEFT HAND COUNTER BORE
COMPLETE LIST OF ALL SHAFT BOLTS BELOW

MULTI-APPLICATION SHAFT BOLT AND STUD INSTRUCTIONS

1. Locate the manufacturer of your trimmer and/or model number under the "Trimmer Brand Cross Reference Guide." NOTE:  BEFORE INSTALLING THIS CUTTING HEAD ON YOUR TRIMMER, PLEASE CHECK YOUR OWNER'S MANUAL FOR ANY SPECIAL TOOLS, SPACERS OR WASHERS THAT MAY BE REQUIRED TO INSTALL YOUR CUTTING HEAD. 2. To install/remove shaft bolt, please refer to "Installing Head" on the instruction guide enclosed with this cutting head. (Be sure to disconnect spark plug wire before servicing.) 3. Select the shaft bolt and stud (if needed) for your trimmer as listed on the "MULTI-APPLICATION" chart above. 4. Some applications are "MALE" and it may be necessary to use one of the studs provided to make up your application.  Simply screw stud into shaft bolt with your fingers. (Do not use pliers as it will damage stud threads.) NOTE: WHEN A STUD IS REQUIRED, SIMPLY SCREW STUD INTO SHAFT BOLT UNTIL FINGER TIGHT. (SEE FIGURE 1.) 5. If you do not see your trimmer manufacturer or model number listed on the "Trimmer Brand Cross Reference Guide" please refer to your owner's manual for proper finished thread size.

INSTALL STUD BY SCREWING IN CLOCKWISE DIRECTION Application Side KNOB/NUT SIDE

FIGURE 1

Refer to "INSTALLING HEAD" on instruction guide for mounting directions.

SHAFT BOLT THREAD X ROTATION CHART Shaft Bolts Currently In Stock

PART #	COLOR X #	ITEM	THREAD X ROTATION
H-150008		Shaft Bolt	6mm x 1.0 MLH
H-150110	Blue #1	Shaft Bolt	8mm x 1.25 FLH
H-150111	Green	Shaft Bolt	8mm x 1.25 FLH - CB
H-150120	Silver #2	Shaft Bolt	10mm x 1.25 FLH
H-150121	Gold	Shaft Bolt	10mm x 1.25 FLH - CB
H-150130	Gold # 3	Shaft Bolt	10mm x 1.00 FLH - CB
H-150140	Red #4	Shaft Bolt	3/8 x 24 FRH
H-150150	Gold #5	Shaft Bolt	8mm x 1.25 MLH
H-150160		Shaft Bolt	10mm x 1.25 MLH
H-150170		Shaft Bolt	7mm x 1.0 MLH
H-150190		Shaft Bolt	10mm x 1.25 FRH
H-150210		Shaft Bolt	12mm x 1.75 FLH - CB
H-150230	Black #M	Shaft Bolt	8mm x 1.25 FRH
H-150350		Shaft Bolt	3/8 x 24 FLH
H-150370		Shaft Bolt	7/16 x 20 FRH
H-150088	+ #3 = #1	Insert / Stud	10mm x 1.0 - 8mm x 1.25 FLH
H-153025	Black	Stud	8mm x 1.25 - 10mm x 1.25 MLH
H-153026	Silver	Stud	7mm x 1.00 - 10mm x 1.00 MLH
H-153027	Copper	Stud	8mm x 1.25MRH - 3/8 x 24 MRH
H-153028	Brass	Stud	10mm x 1.25 - 3/8 x 24 MRH
H-153029	Green	Stud	1/4 x 20 - 3/8 x 24 MRH
H-153030	Silver	Stud	5/16 x 18 - 38 x 24 MRH
H-150410	IDC/Ryan/Ryobi	Convert / Adapter	3/8 x 24 MRH

SHAFT BOLT THREAD X ROTATION CHART Custom Shaft Bolts * Manufactured Upon Request

PART #	COLOR X #	ITEM	THREAD X ROTATION
H-150100		Shaft Bolt	10mm x 1.50 FLH
H-150180		Shaft Bolt	12mm x 1.50 FLH
H-150200		Shaft Bolt	10mm x 1.25 MRH
H-150220		Shaft Bolt	7/16 x 20 FLH - CB
H-150240		Shaft Bolt	8mm x 1.25 MRH
H-150250		Shaft Bolt	12mm x 1.25 FLH
H-150270		Shaft Bolt	12mm x 1.50 FLH
H-150280		Shaft Bolt	10mm x 1.50 MLH
H-150290		Shaft Bolt	10mm x 1.50 MRH
H-150300		Shaft Bolt	10mm x 1.50 FRH
H-150330		Shaft Bolt	5/16 x 18 FRH
H-150340		Shaft Bolt	9mm x 1.25 FRH - CB
H-150360		Shaft Bolt	7/16 x 14 FRH

Homelite Adapters
"STUD" Adapter  PN# H-153029 "Green" & "STUD" Adapter  PN# H-153030 "Silver"
H-153029 FITS: HOMELITE HBC-18 HBC-30 HBC-30B HBC-38 HBC-40 ST-145 ST-155 ST-175C ST-175G ST-185 ST-285 H-153030 FITS: HOMELITE                   Expand your ability to use the Leecraft Head with your Trimmer Works with the Leecraft Manual or Bump-N-Feed (TM) Head  PN# H-153029 PN# H-153030 O.E.M Side 1/4 x 20 MRH O.E.M Side 5/16 x 18 MRH     Shaft Bolt Side 3/8 x 24 MRH Shaft Bolt Side 3/8 x 24 MRH
Works with any manufacturer's    3/8 x 24 FRH Shaft Bolt

I.D.C. / Ryan / Ryobi
ConvertAdapter  PN# H-150410
FITS: Expand your ability to use the Leecraft Head with your Trimmer Works with the Leecraft Manual or Bump-N-Feed (TM) Head  LAWNBOY SS2 Series 1150 1400CL PARAMOUNT 2645 2648 RYAN B-260, B-261, B-270, B-280 274, 274-2, 275, 275-1 500, 500-1, 520, 520-1 262, 263, 264, 264-1 264-2, 265, 265-2, 265-P RYOBI 700R 720R 740R 764R STIHL FS36 FS40 FS56 TORO TC-1000 TC-2000
Works with any manufacturer's    3/8 x 24 FRH Shaft Bolt